Bridgelux 45mil High Power 3w Led Chip With 120 Degree Beam Angle
|Power||Color||Wavelength||Forward Voltage||Forward Current||Luminous Flux|
1) Use high efficient integrated LED as the light source,
2) Wide beam angle: 120 degree (larger lighting area) or customized
3) Smart appearance: built-in power supply, no need ballast,
reflector, it can work independently
4) Unique heat dissipation device: thermostatically controlled fans
to keep LED light cool
5) Small light decay, long lifespan more than 50,000hours
6) Can be combined with fluorescent lighting
7) Environment-friendly: no mercury and other harmful heavy metal,
no light harmful for plant
8) Energy-saving: emitting light fully absorbed by plant, much
efficiency compared o HID grow lights to produce the same result
1, environmental protection: no toxic metals mercury, no infrared
and ultraviolet radiation;
2, color: different wavelengths produce different colored light,
bright saturated, no filter, can control red, green and blue
primary colors to form a variety of colors, can realize full-color
gradients, and other color effects.
Why is blue light important for plants?
Blue light stimulates Chlorophyll production more than any other
color, encouraging thick leaves, strong stems and compact
Blue color is good for leaf and root growing.The wavelength have
450nm and 470nm, if your botany only leaf ,we recommend us 470nm,
if you wanna it is good for root, so we recommend use 450nm.
Why is red lightimportant for plants?
Red light is very important to plant reproduction. Phytochrome
pigments absorb the red and far red portions of the light spectrum
and regulate seed germination, root development, tuber and bulb
formation, dormancy, flowering and fruit production
red is good for blooming ,the wavelength is 660nm and 630nm, if you
plant flower,we recommend you use 630nm, if you plant blossom and
yield fruit,we recommend you choose 660nm
1. During the soldering, the electronic soldering iron must be kept
under the tempetature of 300°C and the soldering time must not be
beyond 3 seconds. No touch between the electronic slodering iron
2. Handwork soldering is only allowed once. We won't take
responsibility for more than that.
3. void using sharp objects to compress products colloidal part
4. Please put on the antistatic hand loop during the use. The
worktable should be with antistatic finish. The equipments must be
contacted with ground.