High Strength Transparency Neutral Silicone Glass Sealant Weather
One-component, drying at neutral room temperature, Good
cohesiveness for glass ; Excellent weathering resistance,
resistance to ultraviolet radiation, ozone resistance, water
resistance; Outstanding High and low temperature resistant
performance , Still not brittle, hardening or cracking After curing
under the low temperature of 50 ℃, Will not become soft,
degradation, and always maintain good strength and elastic at + 150
℃ high temperature
1, Use for structure's assembly of glass curtain wall .
2, It can sealing the glass and metal's surface to a single
assembly components directly .
3, It can meet the requirement of fully-hidden or semi-hidden frame
curtain wall design ;
4, It's suitable for the insulating glass structural's second
layer's sealing .
5, The site that particularly high requirements on the sealing
performance, and multi-purpose;
Restriction of Usage:
Unsuitable used on the material's surface that leaking grease,
plasticizeror solvent. It should be used in the ventilated places,
because the silicone sealant need to absorb the moisture in the air
for drying. Unsuitable used for frost or wet surface. Unsuitable
used for construction on the material's surface that the
temperature lower 6℃ or higher than 40℃. Unsuitable used for
construction on the unclean and uptight substrate's surface.
Unsuitable used for the interface of ground that bears the
structural strength or the ground damage by excessive physical.
Main Technology Data:
Not change shape
Not change shape
Tensile proper(MPA)at 90℃
Tensile proper(MPA)at 30℃
Pot life when 20Mins
Tensile proper(MPA)after flooding
Tensile proper(MPA)after flooding and UVA irradiation
Tensile proper(MPA)at 23℃ Tensile strength in adhesion(%)
Tensile proper(MPA)in standard condition
9 months shelf life if stored below 27℃ in cool and dry place after
Standard: GB16776 - 2005
Color Sheet Card:
Estimated amount of use: Please see following form of estimated
amount of various joints:
The length of KAYA-201" High performance neutral silicone structure
sealant " can be extrude during application.
Note: The actual usage amount maybe different due to the joint
design, installation position of pad material, repairing skill and
wastage in application.
Attention: Information published in this instruction is correct.
However, but no means can it be considered and absolute guarantee,
as usage and application of the product in accordance with the
instruction given and success in application is beyond our control
and is depend on many factors. Customers should have a good
knowledge of product and make independent judgments of optimal
usage before application.