ZDY Bevel Wheel, Circular Gear Cylindrical Gear Reducer with Hard
Type, specification of speed reducer and its expressed method
A. The type has ZDY single-stage cylindrical gear speed reducer,
ZLY double-stage cylindrical gear speed reducer, ZSY three-stage
cylindrical gear speed reducer
B. Specification: Single stage: 80, 100, 125, 160, 200, 250, 280,
315, 355, 400, 450, 500, 560;
Two tage: 112, 125, 140, 160, 180, 200, 224, 250, 280, 315, 355,
400, 450, 500, 560, 630, 710;
Three-level: 160, 180, 200, 224, 250, 280, 315, 355, 400, 450, 500,
560, 630, 710;
A. The gear is made of high strength low carbon alloy steel through
carburization and quenching. The hardness of tooth surface may
reach to HRC58-62. All gear adapts NC tooth grinding process, high
in accuracy and good in contact performance;
B. High in transmission efficiency: Single stage, more than 96.5%;
Double-stage, more than 93%; Three-stage, more 90%;
C. Smooth and stable in run, low noise;
D. Compact, light, long life, high bearing capacity;
E. Easy to disassemble, inspect and assemble.
2. Brief Product Introduction
This product is an outer meshed involute helical tooth cylindrical
gear speed reducer.
It is widely applied to the fields of metallurgy, mines, hoisting,
transportation, cement, architecture, chemical, textile, printing
and dyeing, pharmaceutical, etc.
The suitable scope of speed reducer is as follows:
A. The rotation of high speed shaft should not be more than
B. The circumferential velocity of gear transmission should not be
more than 20, /sec;
C. The temperature of work environment should be -40-45 egree
celsius. If below 0 degree celsius, before start, the lubricating
oil should be pre-heated to above 0 gree celsius. This speed
reducer can be run at clockwise and counterclockwise direction.
3. Company Profile & Workshop Corner Show
Changzhou Mingdi Machinery Co., Ltd is a professional transmission
machinery manufacturer of
producing various gears, gear transmission and reducers, the
hardened-tooth-surface cylindrical gearbox that is our featured
product is widely used in four fields, among which
are electrical machinery, plastic extrusion machinery, railway
engineering machinery and metallurgical
Max speed for input shaft of gearbox is ≤1500rpm.
peripheral speed for the gear is less than 20m/s;
Working temperature is -40~+45 degree, when it's less than 0
degree, the lubrication oil should be heated before operation.
Applicable for the industries such as metallurgy, mine, chemical
industry, construction materials, hoisting,
transportation, textile, paper marking, food, plastic, rubber,
engineering machinery, and energy industry.
Our Competitive Advantages
1. We ensure we will make immediate response on your enquires and
any queries in 12 hours
2. Ability to produce customerized products as request.
3. Complete processing & testing equipment.
4. Quality is our culture; quality is the soul of enterprise.
5. Competitive price: we can give you an edge over your competitor.