1BGA repair adopt liner slide which makes XYZ axis all can do
precision adjustment or fast positioning, with high positioning
accuracy and fast maneuverability.
2For BGA rework station, high definition touch screen (Taiwan), PCL
control, can save multiple groups profile, password protection and
modify function, and can save multiple groups profile, equipped
with instant temperature curve analysis function.
3There are 3 independent heating areas of BGA repair from top to
bottom. The 1st and 2ND are hot-air heaters, the 3rd is IR
preheating, temperature controlled within ± 3 ° C; Top heater can
be adjusted freely, second heater can be adjusted up and down, top
and bottom temperature can control many groups and sections of
temperature parameters at the same time; The power consumption of
the third IR heater can be adjusted;
4Offer all kinds of hot-air nozzles of BGA repair, it can rotate
360° C. With magnet, easy to install and change, customized is
available; Bottom IR heater ensure an even heat for PCB board;
5 BGA chip choose imported high-precision K-type thermocouple,
closed loop control and automatic temperature compensation system,
combined with PLC module for the precision control of temperature.
6. Use a V-groove equipped for BGA chip with a flexible fixture for
PCB positioning to protect the PCB from deformation when heated or
cooled, and it can rework any BGA package size;
7Powerful cross-flow fan rapidly cool the PCB board to improve
efficiency; Also built-in vacuum pump and external vacuum suction
pen, pick up the BGA chips rapidly.
8After finishing desoldering & soldering, there is an alarming
and alarming in advance for BGA rework station.
9CE certificate, with emergency stop and Automatic power-off
protection device when abnormal accident happens, with a double
over-heating protection control. &
|Bottom heater||2nd heater 1200W, 3rd IR heater 2700W|
|Power supply||AC220V± 10% 50/60Hz|
|dimension||635× 600× 560mm|
|Positioning||V-groove, PCB support can be adjusted in any direction with
external universal fixture|
|Temperature control||(K Sensor) closed loop, independent heating, precision within ± 3°
|PCB size||Max 410× 370mm Min 20× 20 mm|
|Electrical selection||Highly sensitive temperature control module+Touch screen