Detailed Product Description
High/Low Power Switchable
High/Low power is switchable via the programmed key at a per
channel basis, tailored for user environment.
Low output power preserves battery life when communication within
limited range coverage; while high output power optimizes range
coverage when further distance required.
Programmable 12.5kHz / 25kHz Channel Spacing
The feature enables flexibility and easy migration of channel
spacing requirements when the need arises, with no need to buy new
DTMF ANI Encode
DTMF ANI can be set on or off at a per channel basis.
2-Tone Encode and Decode
The 2-Tone encode and decode functions are assignable at a per
channel basis. An incoming message is signaled with audio and
Allows continuous channel monitoring. The feature is especially
helpful for adjusting volume or receiving a weak signal.
The Battery Save feature is automatically activated once no
activity on the channel and no operation performed, for extended
Low Battery Alert
For extra convenience, the top-mounted LED flashes red to alert
users to recharge the battery should the battery level run low.
Busy Channel Lockout
The feature further improves channel management by preventing
transmission if another talk group is already on the air.
The feature allows for more efficient use of channels by limiting
the amount of time of each transmission.
Cloning enables duplication of radios in the field via a simple
interface cable, without the use of a PC or special equipment.
Allows you to customize each radio to fit your needs.
Squelch Tail Elimination
The function will minimize the annoying audio outputs that occur at
the receiver on completion of a transmission.
Selectable Squelch Level (0-9)
The purpose of squelch is to mute audio output from the speaker
when no signals are present. The higher the squelch level selected,
the stronger the signals must be to receive. The appropriate
squelch level depends on ambient RF noise conditions.
Priority Channel Scan
Priority scan permits scanning of all channels while simultaneously
monitoring a priority channel, allowing for activity even while
receiving a call on another non-priority channel.