Sign In | Join Free | My
China Yixing Aoerwei Environmental Protection Co., Ltd logo
Yixing Aoerwei Environmental Protection Co., Ltd
ICP Remarked Supplier
Home >

Slag water separator

Yixing Aoerwei Environmental Protection Co., Ltd

Slag water separator

Country/Region china

Company Yixing Aoerwei Environmental Protection Co., Ltd

Categories Drinking Water Treatment Systems

Update 2017-05-27 16:53:42

ICP License Issued by the Chinese Ministry

Contact Now

Slag water separator

I. Overview

Slag water separator in analyzing and summarizing developed on the basis of contemporary methods of advanced water purification equipment. After long-term use, welcomed by users. The equipment is mainly used for industrial boiler (kiln) furnace, coal preparation plant, coking plant, boiler station wet dust, waste water and coal ash hydraulic punch punch (washed) coal waste water purification may also be used in rural, urban, industrial and mining enterprises and other industries etc. do not deal with water purification and other general contain suspended solids.

Second, the principle

After stirring the gray water injection pump mortar coagulation zone into the swash plate precipitation zone, and finally get through the filter layer to meet emission standards and reuse water. If necessary, using the configuration of the filter backwash system and other backwash. Ministries mechanism is as follows:

1. Coagulation stirring

It generates a corresponding low pressure compression (0.1-0.3mpa) gray water through spray nozzles into the first high-speed response. Micropores ash-containing gas, namely changes in volume at low pressure contained in the gas, this time by vigorous stirring, gas may be out of the water. the specific gravity of the slag particles, that increases.If you increase the coagulant can be carried out in this flocculation. Precipitation for the next step to prepare the necessary clarification.

2. The swash plate lake lake

According advection sedimentation principle: When the flow (q) and sedimentation rate (u) are given value. Precipitation efficiency (e) and a horizontal area of sedimentation tank (a) proportional. That e = ua / q. Visible water plane by a height to a settling tank is divided into m intervals, the horizontal area that is increased m-fold, from surface precipitation efficiency e also increased m times. In order to facilitate the removal of the plane of the accumulation of sediments and the plane tilted 60 °, although effective level area is reduced by 50%, but still achieve the purpose of improving the efficiency of precipitation.

Where settling velocity greater than the rise in the swash plate gray water zone speed particles deposited on the entire swash plate.

3, filtered

The smaller the particle filter, the filter layer interstitial also smaller, the smaller the particle size through the gap. Thus, where the gap is greater than the layer of mud particles are filtered barrier layer to stay. So as to achieve the purpose of separation of solid-liquid two-phase.

4, backwash

According hydraulic scouring action is retained in the lower portion of the filter layer and the ash particles, etc., all heavier than water and the precipitate that is separated from the filter. Thereby recovering the filtration performance of the filter layer.

Third, the selection of equipment parameters

Processing capacity (t / h)
Dimensions (mm)
Tube pathway
Weight (kg)
Feet (mm)

Product Tags:

oil water separator working principle


solids liquids separator


liquid liquid separator sizing

China Slag water separator

Slag water separator Images

Inquiry Cart 0
Send your message to this supplier
*To: Yixing Aoerwei Environmental Protection Co., Ltd
Characters Remaining: (0/3000)