AXP-602A and AXP-802 are the silver plus silver-plated-copper
filledconductive coatings. Only 15m-20m of dry film can effectively
shield electromagnetic radiation, insulate electromagnetic field,
and has good electrical conductivity.
Single component, labor saving, time saving and easy operating
Even and smooth surface of the coating and base body after
With high cohesion, without loose particles
Appropriate viscosity, effectively control particle sinking
Good volatility of solvent, quickly solidifying
AXP-602A and AXP-802 are the high performance
silver plus silver-plated-copper filled conductive coatings. They
can be used for the places where need EMI/RFI shielding or to earth
to get rid of static electricity. They are easy to be painted on
the internal walls of different components, and to achieve the
requirement of shielding and insulating from electromagnetic wave.
They are applied to the internal wall of the equipment for
military, aerospace, communication, electronic and computer. They
can also be used for the wall painting of secret room, warehouse
and other shielded projects. In case of receiving same shielding
effectiveness, these coatings are easier to construction and less
costly than the tangible shielding materials. Thus the overall
design of the project is simple and fast.
These coatings can also be used on the internal wall of the
housings of cell phone, computer, precision instrument which the
substrates are PC, PS, ABS, metal or composite material. They can
be produced in single packing, short runs and painting production
Color:buff and light copper
Viscosity:8-16s (#4 Viscosity Cup, at 25℃)
Resistance:＜0.4/(15m-20m dry film)
Environmental Test: 85℃, no change in resistance in 10 days with the relative humidity of
Painting Area: 8-10m2/kg (film thickness 15m-20m)
Drying time: 30 minutes flash off at the temperature of 45℃-60℃.The performance exert completely in 90 minutes.
4. Operation Instruction
Surface treatment for the part to be painted
The base material should be clean, dry and smooth; Clean the
surface of the base material with alcohol or special solvent.
Mixing and diluting
Mix the paint lustily for about 30 minutes, and ensure the paint is
even and there is no deposit in it before