rigid foam insulation
- Click To Down
- Ask for a quote...
rigid foam insulation
MIC-500 MOBILE INSULATION SYSTEM FOR CELLULOSE MATERIAL
Spray applied cellulose fiber insulation in combination with a
water reducible, clear adhesive to achieve a closed cavity.
Relatively heavy textured thermal and acoustic material typically
from 1.9cm to 15.2cm, depending on the project requirements.
The fiber is produced from high quality recycled paper from various
which may vary slightly in color. Care must be exercised to ensure
mixture of material.
Standard color is beige. Multiple colors available.
Resistance Factor of 4.6 per inch of application (R value is
Flame retardant insulation has a Class 1, Class A flame spread
ASTM E-84, UL-723, NFPA-255 and UBC-42. Underwriter's Laboratories
reference number # R5499.
Cellulose- recycled paper and cardboard, flame retardant additives,
colors, component adhesive, boric acid treated for pest and rodent
Adhesive Binder- Concentrated, viscous, water reducible, clear,
adhesive comprised of Vinyl Acetate, Ethylene Copolymer, Methanol
(contains not carcinogens). Used in different mixture ratios for
(up to 7.5 cm) and high build(7-15 cm) insulation applications..
MIC-550 MOBILE SURFACE SEAL FOR CELLULOSE MATERIAL SPECIFICATIONS
Durable water based surface seal coating designed to be spray
cellulose insulation or a fifi brous, porous surface.
NRC rating shall be .55 or greater per ASTM C-423 when applied over
4.5cm of cellulose spray-on insulation.
Abrasion resistant, paintable.
Applied in a heavy or light coat between 1/16- 1/8 inches thick
Protective Coating shall have a Class 1 rating and a flame spread
to exceed 5 when tested in accordance with ASTM E-84
Standard color is white to off-white. Multiple colors available.
Water, Calcium Carbonate, Vinyl Acrylic, Cellulose Fibers,
Acid, Defoamer, Titanium Dioxide, Bentonite.
MIC-660 MOBILE INSULATION SYSTEM FOR URETHANE MATERIAL
Polymer based, plural component, closed cell, rigid foam insulation
2 lbs core density (2 lbs per cubic foot, 32 kg per cubic meter).
Spray applied with a ratio of 1:1 by volume using the H20/35
Standard color is yellow. Multiple colors available.
Resistance Factor of 7 per inch of application (R value is
28 lbs per in2 (19687kg m2).
AATCC 127-1995 Suter Hydrostatic Pressure resistance test, no
ASTM E 285-91, 0.0 cubic feet per minute/ft2.
Component A-Activator 10.3 lbs per gallon (1.24kg per liter).
Component R-Resin 9.7 lbs per gallon (1.16kg per liter).
Requires a 15-minute thermal barrier apllied over top in occupied
Polyurethane is not to exceed a flame spread rating of 20 in
with ASTM E-84.
A fresh air hood system is required to prevent dangerous inhalation
MIC-800 MOBILE FIRE PROTECTION SYSTEM FOR URETHANE MATERIAL
Cementitious fire protective coating specififi cally formulated for
over rigid urethane and polystyrene foam plastics. Forms a hard,
acoustic surface that provides a monolithic thermal barrier against
heat and fire.
Standard color is gray. Dries off-white. No other colors available
Complies as a thermal barrier under Uniform Building Code 1997.
Mixed directly with water and typically spray applied from 1.2cm to
1.9cm to provide a 15-minute thermal barrier over foam
ASTM E 119 has a 15-minute thermal rating applied at 1.9cm. ASTM
E 84 has a flame spread rating of 10 applied at 1.2cm.
Laboratories approved in accordance with UL 1715 Room Fire Test.
Portland cement (Portland cement is a hydraulic cement made by
and grinding a clay and limestone mixture,) cellulose fibers, clay
chopped glass filament.