A horizontal cylinder Grilling parameters:
This machine is a horizontal cylinder structure, using cycloid
reducer, chain drive. Wastewater into the overflow from the inlet channel, after steady
flow uniform to the inner wall of the grid rotates counter-flow
direction, flow and grid fanqie to do relative motion, and the
filtrate is discharged from the gap of the gate, residues trapped
in the net.Trapped in a grid of residues in the lower guide plate grid wall
action, the slag discharged from the end of Automatic. Since the reverse relative movement of the gate wastewater barrel,
over the water to improve the rate and decreasing the adhesion of
residues on the grid, thereby increasing the efficiency of
filtration and recycling. Backwash system consists of inner and outer spraying tubes,
high-pressure water or compressed air through the high-speed jet
nozzle fan-shaped, clear the gate seam, remove the grid attached to
the inner wall of solid matter. Flushing pressure ≥0.3Mpa. Periodic backwash operation (controlled or manually set). The filtrate from the gate out of the cracks in the protective
cover of the guiding role, bringing together just below the grid
from the sink and runoff.
1. The work is simple, convenient, no staff on duty.
2. The high filtration efficiency, and continuous, Automatic
drainage, slag, etc., slag concentration ≥5%.
3. separation, and solids removal efficiency of more than 90% of
the waste paper fiber recovery ≥80%.
4. Low maintenance costs. As the machine transmission parts not in direct contact with the
waste water, it is not easy corrosion, grid because of long life,
without frequent replacement, low maintenance and maintenance
5. Low operating costs. Motor capacity is only 0.75 ~ 2.2KW / Taiwan. Another consume a small amount of backwash water or compressed air. Compared with other types of filter, low energy consumption.
6. Small footprint. This series is the largest size model installation area does not